Transfer Roll To Roll Film Coating Machine
Brief Introduction
The equipment is suitable for surface coating of various substrates and can be freely switched between continuous and intermittent coating. It has a substrate tension control function to ensure stable material belt travelling and is equipped with the correction device to ensure precise material alignment during the coating process. The coater is excellent drying effect, which has a significant impact on the uniformity and performance of the battery material. With its high precision, flexibility and excellent drying effect, the coater meets the requirements of coating accuracy and consistency, and is ideal for battery R&D and small pilot tests.
Key Features
● The rubber roller adopts double servo screw control, which can adjust the coating end according to different viscosity slurry.
● Continuous and intermittent coating can be switched freely.
● Substrate tension control and equipped with correction device, to ensure coating material belt keeps stable during work.
● Lower and upper blowing heating oven with excellent drying effect.
● Three-roller transfer coating with wide coating window.
● Comma doctor blade metering, with precision adjustment mechanism to obtain high coating accuracy.
● Using analogue signals to adjust the power output and thus control the temperature, high precision and long lifetime of heating system.
● PLC control, touch screen operation, and easy to use.
● Solvent recovery treatment device is optional.
Technical Parameters
| Model |
STC-TMZT-300
|
| Voltage |
AC380V, 50HZ, three-phase five-wire system. |
| Power |
10KW |
| Coating method |
Continuous, intermittent coating |
| Coating speed |
0~0.5m/min |
| Gap coating length |
Coating length: 10~5000mm,
Bare coating length: 10~500mm |
| Substrate thickness |
Aluminum foil (Al): 8~30μm
Copper foil (Cu): 8~30μm |
| Roller width |
330mm |
| Coating width |
Within 280mm |
| Coating accuracy |
±3μm |
| Slurry viscosity applicable |
2000~12000 (mPa·s) |
| Single side coating thickness after drying |
20-200μm |
| Max unwinding diameter |
φ250mm |
| Max bearing capacity of the air inflatable shaft |
50kg |
| Oven sections |
1pcs |
| Oven length |
1m/pcs |
| Oven temperature |
Max 150℃, the temperature difference in a single oven is ≤ ±2.5℃ |
| Moving methods |
Wheels and foot will be installed. |
| Compressed air |
Exhaust pressure is about 0.5Mpa after drying, filtering and regulation.
|
| Dimension |
L1700 * W1000 * H1100mm |
| Weight |
800kg |
Warranty
1 year's warranty with lifetime technical support.
FAQ
1. Are you a manufacture ?
A: Yes,our factory is located in Shenzhen, China.
We have more than 10 years experience for manufacturing battery lab research equipment. We owns a professional R&D department.
2. Do you accept customized product ?
A: Yes. Most of our products can be customized to meet different requirments.
3. Will you provide test video before dispatch ?
A: Yes, we take test video for every equipment before dispatchm which will display how to use it.
4. Can you offer overseas installation service ?
A: Yes, we can dispatch professional engineer for on-site installion service.
Product Tags:
|
|
Transfer Roll To Roll Film Coating Machine Images
|
